Loading ...
Loading ...
Loading ...
1. Loosen the four fasteners and remove
the air cleaner assembly lid.
2. Remove the air filter element from the
air filter housing.
3. Wipe any dirt or debris from the air
cleaner assembly to make sure no dirt
gets in the engine and to make sure you
have a good seal.
E170433
4. Install the new air filter element. Slide
the open end of the air filter element
in first, below the tab. Then push the
closed end of the air filter into the
bottom of the tray. The closed end
should fit inside the groove in the tray.
The tab of the closed end of the air
filter should be oriented down and fit
between the forks on the tray as shown
at the arrow above.
Note: Make sure you align the tab in the air
filter element with the fork in the air cleaner
assembly tray.
5. Install the air cleaner assembly lid and
tighten the four fasteners.
Duratec Engines
E142711
1. Detach the 2 clips that secure the air
filter cover to the housing.
2. Carefully remove the air filter cover
from the housing. Do not detach any
connections or tubes from the cover.
3. Remove the air cleaner from the
housing.
4. Wipe any dirt or debris from the air filter
housing and cover to make sure that
no dirt gets into the engine.
5. Load the air filter into the housing.
6. Replace the air filter cover and secure
the clips.
264
Escape (TM2) Canada/United States of America, enUSA, Edition date: 201807, First-Printing
Maintenance
Loading ...
Loading ...
Loading ...