Loading ...
Loading ...
Loading ...
11
6. Press and hold START/PAUSE
to begin cycle
Press and hold the START/PAUSE button to begin the cycle.
7. Remove garments promptly
after cycle is nished
Promptly remove garments after cycle
has completed to reduce wrinkling. If
you will be unable to remove the load
promptly, select the Wrinkle Prevent
™
option before pressing
START/PAUSE to add up to 90 minutes of periodic tumbling
after the end of the drying cycle.
5. Adjust cycle settings, if desired
You may adjust different settings, depending on whether
you have selected a Sensor Cycle, Timed Cycle, or Steam
Cycle (on some models). See the “Cycle Guide” for detailed
information.
NOTE: Not all options and settings are available with all cycles.
Not all cycles are on all models.
Sensor Cycles:
You can select a different dryness level, depending on your
load, by pressing the button for More, Normal, or Less.
Selecting More, Normal, or Less automatically adjusts the
dryness level at which the dryer will shut off. Once a dryness
level is set, it cannot be changed without stopping the cycle.
Sensor Cycles give the best drying in the shortest time.
Drying time varies based on fabric type, load size, and
dryness setting.
Timed Cycles:
When you select a Timed Cycle, the
default time appears in the display.
Use the More Time and Less Time
buttons to increase or decrease the time
in 1 minute increments. Press and hold to
change the time in 5 minute increments.
The default temperature may be changed
by pressing the Temp Level button until the desired dry
temperature is lit.
Steam Cycles (on some models):
Steam cycles add an extra boost of steam to help reduce
odors and loosen wrinkles.
Custom Refresh: Use to reduce odors and light wrinkles from
small loads of 3-4 items.
Auto Refresh: Use to reduce wrinkles, including from loads left
in the dryer too long.
Steam model shown
Steam model shown
Changing the Sensor Cycle settings
to increase drying time
If all your loads on all Sensor Cycles are consistently
not as dry as you would like, you may change the default
settings to increase the default dryness level.
Your automatic drying settings can be adjusted to adapt to
different installations, environmental conditions or personal
preference. This change is retained and will affect all of your
Automatic cycles, not just the current cycle/load. There
are 3 drying settings, which are displayed using the time
display:
01 Factory preset dryness level.
02 Slightly drier clothes, 15% more drying time.
03 Much drier clothes, 30% more drying time.
To change the drying settings:
NOTE: The settings cannot be changed while the dryer is
running or paused. The dryer must be in standby mode (the
power button is off) to adjust the default settings.
1. Before starting a cycle, press and hold the TEMP LEVEL
button for 6 seconds.
2. Press the TEMP LEVEL button to select the dryness
level shown in the time display: 1, 2, or 3.
3. Press START/PAUSE to save the new dryness level
setting.
Loading ...
Loading ...
Loading ...