Loading ...
IN0HA5000000000XX
www.rossmax.com
This instrument is covered by a 5 year guarantee from the date of pur-
chase, batteries and accessories are not included. The guarantee is valid
only on presentation of the guarantee card completed by the dealer con-
rming date of purchase or the receipt. Opening or altering the instru-
ment invalidates the guarantee. The guarantee does not cover damage,
accidents or non-compliance with the instruction manual. Please contact
Rossmax service.
Date of purchase:
Store where purchased:
Price Paid (excl. Tax):
Purchase for:
Warranty
EMC guidance and manufacturer’s declaration
Guidance and manufacturer’s declaration-electromagnetic emissions
The HA500 is intended for use in the electromagnetic environment specied below.
The customer or the user of the HA500 should assure that it is used in such an environment.
Emission test Compliance Electromagnetic environment-guidance
RF emissions CISPR 11 Group 1 The HA500 uses RF energy only for its internal func-
tion. Therefore, its RF emissions are very low and are
not likely to cause any interference in nearby electronic
equipment.
RF emissions CISPR 11 Class B The HA500 is suitable for use in all establishments,
including domestic establishments and those directly
connected to the public low-voltage power supply
network that supplies buildings used for domestic
purposes.
Harmonic emissions
IEC 61000-3-2
Not applicable
Voltage uctuations/icker
emissions IEC 61000-3-3
Not applicable
Guidance and manufacturer’s declaration-electromagnetic immunity
The HA500 is intended for use in the electromagnetic environment specied below.
The customer or the user of the HA500 should assure that it is used in such an environment.
Immunity test IEC 60601 test
level
Compliance
level
Electromagnetic environment-guidance
Conducted
RF
IEC 61000-4-
6
Radiated RF
IEC 61000-4-
3
3 Vrms
150 KHz to 80
MHz
3 V/m
80MHz to 2,5
GHz
Not applicable
3 V/m
Portable and mobile RF communications equipment
should be used no closer to any part of the HA500,
including cables, than the recommended separation
distance calculated from the equation applicable to
the frequency of the transmitter.
Recommended separation distance:
d = 1,2 √P
d = 1,2 √P 80MHz to 800 MHz
d = 2,3 √P 800MHz to 2,5 GHz
Guidance and manufacturer’s declaration-electromagnetic immunity
The HA500 is intended for use in the electromagnetic environment specied below.
The customer or the user of the HA500 should assure that it is used in such an environment.
Immunity test IEC 60601 test level Compliance
level
Electromagnetic environment-guidance
Electrostatic
discharge (ESD)
IEC 61000-4-2
± 6 kV contact
± 8 kV air
± 6 kV contact
± 8 kV air
Floors should be wood, concrete or
ceramic tile. If oors are covered with
synthetic material, the relative humidity
should be at least 30%
Electrical fast
transient/burst
IEC 61000-4-4
± 2kV for power supply
lines
± 1kV for input/output
lines
Not applicable
Not applicable
Mains power quality should be that of a
typical commercial or hospital environ-
ment.
Surge IEC
61000-4-5
± 1kV differential mode
± 2kV common mode
Not applicable
Not applicable
Mains power quality should be that of a
typical commercial or hospital environ-
ment.
Voltage Dips,
short interrup-
tions and voltage
variations on
power supply
input lines IEC
61000-4-11
<5% UT(>95% dip in
UT) for 0,5 cycle
40% UT(60% dip in
UT) for 5 cycles
70% UT(30% dip in
UT) for 25 cycles
<5% UT(>95% dip in
UT) for 5 s
Not applicable
Not applicable
Not applicable
Not applicable
Mains power quality should be that of a
typical commercial or hospital environ-
ment. If the user of the HA500 requires
continued operation during power mains
interruptions, it is recommended that the
HA500 be powered from an uninterrupt-
ible power supply or a battery.
Power frequency
(50/60 Hz) mag-
netic eld IEC
61000-4-8
3 A/m 3 A/m Power frequency magnetic elds should
be at levels characteristic of a typical lo-
cation in a typical commercial or hospital
environment.
NOTE: UT is the a.c. mains voltage prior to application of the test level.
Recommended separation distance between portable and mobile RF communications equipment and the HA500
The HA500 is intended for use in an electromagnetic environment in which radiated RF disturbances
are controlled. The customer or the user of the HA500 can help prevent electromagnetic interference
by maintaining a minimum distance between portable and mobile RF communications equipment
(transmitters) and the HA500 as recommended below, according to the maximum output power of the
communications equipment.
Rated maximum
output power of
transmitter / W
Separation distance according to frequency of transmitter / m
150 kHz to 80 MHz /
d=1,2√P
80 MHz to 800 MHz /
d=1,2√P
800 MHz to 2,5 GHz /
d=2,3√P
0,01 0,12 0,12 0,23
0,1 0,38 0,38 0,73
1 1,2 1,2 2,3
10 3,8 3,8 7,3
100 12 12 23
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in metres (m) can be estimated using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reection from structures, objects and people.
OBM_IB_HA500_EN_ver1251
Rossmax International Ltd.
12F., No.189, Kang Chien Rd., Taipei 114, Taiwan
Rossmax Swiss GmbH
Tramstrasse 16, CH-9442 Berneck, Switzerland
Caution
1. Only use the device once you have read and understood these instructions
for use. Keep the instruction manual for use.
2. The thermometer and patient needs to stay in the room in which the
measurement is taken for at least 30 minutes before use.
3. It is recommend that you always take the temperature in the same loca-
tion, since temperature readings may vary according to the locations.
4. It is recommended that three temperatures are taken and the highest one
taken as the reading if:
a) New born infants
b) Children with a compromised immune system and for whom the pres-
ence or absence of fever is critical.
c) When the user is learning how to use the thermometer for the rst time
until he/she has familiarized himself/herself with the instrument and
obtains consistent readings.
d) The reading is extremely low.
5. Do not take a measurement while drinking, eating, sweating or exercising.
6. Do not take measurement while or immediately after nursing.
7. Children is not allowed to use the device. Medical products are not toys.
8. Inuences on body temperature
a) A person’s individual metabolism
b) Age: Greater temperature uctuations occur faster and more often in
children. Normal body temperature decreases with age.
c) Clothing
d) Outside temperature
e) Time of day: Body temperature is lower in the morning and increases
throughout the day towards evening.
f) Activities: Physical and, to a lesser extent, mental activities increase body
temperature.
9. This device is not shock-protected. Do not drop or expose to heavy shock
this device.
10. Do not bend the device.
11. Do not disassemble or make modications the device.
12. Please do not dispose of the product in the household waste at the end of
its useful life. Disposal can take place at your local retailer or at appropriate
collection points provided in your country.
13. Do not boil the probe.
14. Do not use the device if it operates irregularly or any error massage
showed.
15. Do not use thinner or benzene to clean the device.
16. Wipe the device clean before storing.
17. When take the device from storage at below or above
15~40°C(59~104°F), place it in 15~40°C(59~104°F) temperature range
for at least 30 minutes before use.
18. Remove the battery if the device will not be used for a long time.
19. If this device is used according to the operation instruction, periodic
re-calibration is not required. If you still have questions, please send the
complete device to dealers.
20. Please note that this is a home healthcare product only, and it is not
intended to serve as a substitute for the advice of a physician or medical
professional.
21. Do not use this device for diagnosis or treatment of any health problem
on disease. Measurement results are for reference only. Contact your
physician if you have or suspect any medical problems. Do not change
your medications without the advice of your physician or healthcare pro-
fessional.
22. This device may not meet its performance specication if stored or used
outside temperature and humidity ranges specied in specications.
23. Battery should not be charged or placed into extreme heat as it may
explode.
24. The thermometer contains small parts (ex: battery, etc.) that can be swal-
lowed by children. Therefore never leave the thermometer unattended to
children.
25. Be sure to consult a doctor if you feel that your health is in poor condition.
26. Do not judge your health only on the presence or absence of a fever.
Specication
Temperature
measurement range
Temple mode:
34~42.2°C (93.2~108°F)
Object mode: 0~99°C (32~210.2°F)
Accuracy
For temple mode:
+/-0.3°C (0.5°F) during 34~42.2°C
(93.2~108°F).
For object mode:
+/-5°C (8°F) room temperature
15~40°C (59~104°F).
Operating
temperature range
Temple mode :15~40°C (59~104°F).
Object mode :10~40°C (50~104°F).
RH <= 95%
Storage and transportation
temperature range:
Temperature:-25~55°C (-13~131°F),
RH <= 95%
Memory 9 set
Display resolution 0.1
Battery AAA x 2
Weight (without battery) 55g (without battery)
Size 14.5cm(L) x 3.95cm(w) x 4.0cm(H)
Auto shutdown 60 sec.
Battery life
3000 consecutive measurements or 1
year with 1-2 measurements per day
including stand-by mode.
Safety classication
Type BF equipment
*Dispose of device and batteries according to local regulations
(1) In Temple mode: Tem-
perature taken is higher
than +42.2°C (108°F)
(2) In Object mode: Tem-
perature taken is higher
than 99°C (210.2°F)
Please select the target
within specications. If
a malfunction still exists,
please contact the near-
est retailer.
(1) In Temple mode: Tem-
perature taken is lower
than +34°C (93.2°F)
(2) In Object mode: Tem-
perature taken is lower
than 0°C (32°F)
Please select the target
within specications. If
a malfunction still exists,
please contact the near-
est retailer.
Device cannot be powered
on to the ready stage.
Change with a new
battery.
Where P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter
manufacturer and d is the recommended separation
distance in metres (m).
Field strengths from xed RF transmitters, as deter-
mined by an electromagnetic site survey,
a
should
be less than the compliance level in each frequency
range.
b
Interference may occur in the vicinity of equipment
marked with the following symbol:
NOTE1: At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reection from structures, objects and people.
a. Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) tel-
ephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast can-
not be predicted theoretically with accuracy. To assess the electromagnetic environment due to xed
RF transmitters, an electromagnetic site survey should be considered. If the measured eld strength
in the location in which the HA500 is used exceeds the applicable RF compliance level above, the
HA500 should be observed to verify normal operation. If abnormal performance is observed, addi-
tional measures may be necessary, such as reorienting or relocating the HA500.
b. Over the frequency range 150 kHz to 80 MHz, eld strengths should be less than 3 V/m.