Loading ...
Loading ...
Loading ...
5
OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any length of
time during this process, it must be allowed to remain upright
for 6 hours before plugging it in to avoid damage to the internal
components.
1. Remove the hinge cover and the upper hinge. Remove
the hinge hole covers from the top left side of the cabinet.
Remove the freezer door from the cabinet.
2. Remove the screws from the center hinge. Remove the center
hinge, the center hinge spacer and the refrigerator door.
3. Move the bushing from the top right side to the top left side
of the refrigerator door.
4. Remove the right door stop from the bottom of the
refrigerator door.
5. Remove the lower hinge from the right side of the cabinet,
then install the lower hinge on the left side of the cabinet.
6. Get the left door stop from the accessory bag, install it on the
bottom left side of the refrigerator door.
7. Remove the center hinge screw hole plugs and install them in
the screw holes on the right side of the cabinet.
8. Install the refrigerator door. Install the center hinge. Ensure
that the center hinge spacer is installed with the center
hinge as the spacer is necessary to allow the doors to have
full range of motion. Get the left upper door stop from the
accessory bag, install it on the bottom left side of the freezer
door.
9. Install the freezer door. Install the upper hinge and hinge
cover on the top left side of the cabinet. Before tightening the
screws on the upper hinge, ensure that the top of the door is
level with the cabinet and that the rubber gasket is making a
good seal. Install the screw hole covers on the top right side
of the cabinet.
A. Hinge Cover
B. Screws
C. Upper Hinge
D. Hinge Hole Cover
E. Center Hinge Spacer
F. Center Hinge
G. Door Bushing
H. Right Door Stop
I. Lower Hinge
J. Left Door Stop
K. Screw Hole Cover
A
K
B
C
D
E
F
G
H
I
B
G
B
B
B
J
E
F
G
B
A
B
C
D
1
2
3
4
5
6
7
8
9
Loading ...
Loading ...
Loading ...