Loading ...
Loading ...
Loading ...
13
SpeedBoost function
The SpeedBoost function can be used to heat large
amounts of water faster than by using heat level
Š.
Limitation on use
This function is available on all elements, provided that
no other element in the same group is operating, (see
picture). If this is not the case, the
› and Š symbols will
flash on the selected element display; then it will
automatically set the power level
Š.
In group 2, the function may be activated at the same
time for all elements (see picture).
Turning on SpeedBoost
1.
Select an element.
2.
Touch Boost. The letter › will light up in the element
display. The function has been turned on.
Turning off SpeedBoost
1.
Select an element.
2.
Touch the Boost touch key. The letter › will no longer
be displayed and the element will return to heat level
Š. The SpeedBoost function has been deactivated.
Note: In certain circumstances, the function may be
deactivated automatically to protect the internal
electronic components of the cooktop.
Cook time
You can use the timer function to set a cook time for any
element. The element will turn off automatically once the
set time has elapsed.
9 CAUTION
▯ When using the timer, always keep an eye on the
cooktop and do not allow anything to boil over or
burn. Boilovers can cause smoke and foods and
oils may catch on fire if left on high temperature
settings.
▯ This function should not be used for long periods
of time, especially at high heat settings.
▯ Make sure the cooktop is turned off with the main
power switch after each use.
Setting the cook time
1.
Select the desired element and power level.
2.
Touch the Timer key. The ‹‹, min and __ indicators
light up on the timer display. The indicator for the
desired element lights up.
3.
Within the next 10 seconds, set the required time
using the number keys 0 to 9.
After a few seconds, the timer will start to count down.
The last programmed cook time will appear in the
display.
Once the cook time has elapsed
The element turnes off once the set cook time has
elapsed. You will hear a beep. The indicator ‹.‹ appears
in the element display and the timer display shows ‹‹.
Once you touch the Timer key, the indicators and the
beep are turned off.
Changing cook time
Select the element and touch the Timer key twice. Set
the new cook time using the number keys 0 to 9.
Cancelling cook time
Select the desired element and touch the Timer symbol
twice. The min, __ and r indicators light up. Then select
0 from the number keys until ‹‹ is displayed.
*URXS
*URXS
*URXS
Loading ...
Loading ...
Loading ...