Loading ...
Loading ...
Loading ...
9
Care & Maintainence.
Before any maintainence, please ensure unit is
switched off:
WARNING:
Servicing shall only be performed as recommended by
the equipment manufacturer.
Basic maintenance can be done by the consumer
however any Repairs to this equipment requires skilled
personnel competent in the use of flammable
refrigerants.
Please Contact MIDEA CUSTOMER & TECH
SUPPORT on 1300 726 002 for further advice.
Do not use any chemically treated cloth or duster to
clean the unit.
Do not use benzine, thinners, polishing powder or
similar solvents for cleaning. These may cause
the plastic surface to crack or deform.
Never use water hotter than 40
O
C to clean
the front panel (or air filters) as it could cause
deformation or discoloration.
Cleaning the air filter and air freshening filter
A clogged air filter reduces the cooling efficiency of
this unit. It is reccomended to clean the filter once
every 2 weeks.
1. Open the front panel by carefully lifting both
ends at the same time. At a certain angle, a
clicking sound is heard and it becomes self-
supporting. For some models please use the
suspension bars to prop up the panel.
2. Use the tab provided to move the filter first up
a little, then slightly towards you. Now extract
the filter by gently drawing downwards.
3. Unclip the small air freshening filter from the
large air filter. Clean it with vacuum, and
replace it occasionally.
4. Clean the large air filter with soapy water.
Rinse with fresh water. Shake off excess water
and dry it in a cool place. (May shrink if put
into sunny position)
Preparation for extended non-operation
Pre-season inspection
If the unit has been idle for a long time, please check
andcleanthe indoorunitanditsfilters.
The outdoor unit requires periodic maintenance
and cleaning. It is suggested you contact your dealer
or service provider who will inspect for damaged or
disconnected wires, check for water or oil leaks and
check if the air outlets or inlets have been blocked
while unit has been idle.
1) Clean the indoor unit and filters and operate the fan for
about half a day to dry the inside of the unit.
2) Stop the air conditioner and disconnect power.
3) Remove the batteries from the remote controller.
Loading ...
Loading ...
Loading ...