Loading ...
Loading ...
Loading ...
13
Why can’t I establish a connection? Why is the
connection lost every now and then? Why are
there sound interruptions?
• The baby unit and the parent unit are probably
close to the outer limits of the operating
range or there is interference from other
2.4GHz wireless devices. Try a different
location, decrease the distance between the
units or switch off other 2.4GHz wireless
devices. Please note that it takes about 5
seconds each time before a connection
between the units is re-established.
• If you have two video baby monitors, keep
them at least 1.5 metres (5 feet) away from
each other to prevent interference.
• Perhaps the baby unit is not connected to the
mains and the non-rechargeable batteries in
the baby unit are empty or there are no non-
rechargeable batteries in the baby unit at all.
Connect the baby unit to the mains or put new
non-rechargeable batteries in the baby unit.
Then set the on/off switch of the baby unit to
ON position to establish connection with the
parent unit.
What happens during a power failure?
• As the parent unit works on a rechargeable
battery, it continues to work if the battery is
sufciently charged. If you have placed non-
rechargeable batteries in the baby unit, the
camera continues to work and you can see
your baby.
Why do the non-rechargeable batteries of the
baby unit run low quickly?
• The baby unit consumes a lot of energy
when you have the video display switched on
continuously, when you play lullabies or when
the nightlight is switched on. We recommend
to always use the baby unit from the mains and
use the batteries for back-up purpose only.
Do not place rechargeable batteries in the baby
unit, as they discharge slowly even when they
are not in use.
Switching on/connecting the units
Why don’t the power-on light of the baby unit
and the parent unit go on when I switch on the
units?
• Perhaps the rechargeable battery of the
parent unit is empty and the parent unit
is not connected to the mains. Insert the
appliance plug into the parent unit and put the
adapter in a wall socket. Then press and hold
the on/off button to switch on the parent unit
and to establish connection with the baby unit.
• Perhaps the baby unit is not connected to the
mains and the non-rechargeable batteries in
the baby unit are empty or there are no non-
rechargeable batteries in the baby unit at all.
Connect the baby unit to the mains or put new
non-rechargeable batteries in the baby unit.
Then set the on/off switch of the baby unit to
ON position to establish connection with the
parent unit.
Why doesn’t the parent unit charge when I plug
it in?
• The rechargeable battery may have reached the
end of its life. Replace the rechargeable battery.
• Perhaps the adapter is not plugged in properly.
Make sure the adapter is plugged into the wall
socket properly.
Why doesn’t the baby unit charge when I plug
it in?
• The baby unit does not have a charging
function. Put new non-rechargeable batteries in
the baby unit if you want to use the baby unit
cordlessly.
ENGLISH
Loading ...
Loading ...
Loading ...