Loading ...
Loading ...
Loading ...
CONTROL PANEL
_FAN SPEED
• Every time you push this button, it advances the setting as follows: {High _Low _Med _High}
REMOTE CONTROL SIGNAL
RECEIVER
TEMPERATURE SETTING
• Use thisbutton to automatically control the
temperature of the room.
The temperature can be set within a range
of 60°F to 86°F by increments of 1°F.
• The setting appears in the display.
POWER
• Toturnthe air conditionerON, pushthe button.
Toturnthe airconditionerOFF,push
the buttonagain.
f
LTIMER • This buttontakes priorityoveranyotherbutton.
- SHUT-OFF TIME • Whenyou firstturn iton, the air conditioneris on
• You will usually use shut-off time while you sleep, the Highcool modeandthe Temp.at 72°F.
• If unit isrunning, usetimerto setnumberof hours untilshut-off. • Auto restart
• Foryoursleepingcomfort,oncetimerisset,thethmperature Inthe eventasa powerfalture,the unitwill run
settingwill raige2°Fafter30minandonceagainafteranother30min. attheprevioussettingoncepowerreturns.
• Push timer buttonto advance settingfrom 1 Hour * 2Hour...... 12Hours maximum.
- START TIME
• If unit isoff, Timer setsnumberof hours before unitstarts.
• Push timer buttonto advance settingfrom 1 Hour _2Hour...... 12Hours maximum.
MODE
- Push this button to shift mode of operation from cool * energy saver * fan.
- ENERGY SAVER:
• The fan stops when the compressor stops cooling.
Approximately every 3 minutes the fan will turn on so that the unit can check the room air to determine if
cooling is needed.
In failure of electric power, the unit runs as previous setting operation. J
HORIZONTAL AIR DIRECTION CONTROL VERTICAL AIR DIRECTION CONTROL
The horizontal air direction is adjusted by moving The vertical air direction is adjusted by moving the
horizontal louvers up and down with your fingertips.
the vertical louvers right and left with your (FIG. 25)
fingertips. (FIG. 24)
FIG. 24 FIG. 25
-11 -
Loading ...
Loading ...
Loading ...