Loading ...
Loading ...
Loading ...
uuOperating the Switches Around the Steering WheeluDriving Position Memory System
*
204
Controls
1. Set the power mode to ON. Adjust the
driver’s seat to the desired position.
2. Press the SET button.
u You will hear the beeper, and the
memory button indicator light will blink.
3. Press memory button
(1 or (2 within five
seconds of pressing the SET button.
u Once the seat position has been
memorized, you will hear the beeper
twice, and the indicator light on the
button you pressed stays on.
1. Put the transmission into
(P.
2. Apply the parking brake.
3. Press a memory button (
(1 or (2).
u You will hear a beep, and the indicator
light will blink.
The seat will automatically move to the
memorized position. When it has finished
moving, you will hear the beeper twice, and
the indicator light stays on.
■
Storing a Position in Memory
1Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
• You do not press the memory button within five
seconds.
• You readjust the seat position before the double-
beep.
• You set the power mode to any position except
ON.
Memory
Button 1
Memory
Button 2
SET Button
■
Recalling the Stored Position
1Recalling the Stored Position
The seat will stop moving if you:
• Press the SET button or memory button (1 or (2.
• Adjust the seat position.
• Put the transmission into a position other than (P.
Memory Buttons
SET Button
18 ACCORD HYBRID-31TWA6000.book 204 ページ ２０１８年１月３０日 火曜日 午後７時３８分
Loading ...
Loading ...
Loading ...