Loading ...
Loading ...
Loading ...
16
17
INSTALLATION INSTRUCTIONS
Adjusting the Doors
Leveling
Your refrigerator has two front adjustable legs - near each
front corner of ther refrigerator, next to the rollers. If your
refrigerator seems unsteady or you want the doors to
close easier, adjust the refrigerator’s tilt using the following
instructions:
1.
Remove the base grille. See “Front Base Grille
Installation”.
2.
Turn the two front leveling legs clockwise to raise the
front of the refrigerator and counterclockwise to lower.
NOTE:
Having someone push against the top of the
refrigerator takes some weight o the leveling legs
which makes it easier to adjust.
3.
Open both doors again to make sure they close as
easily as you like and that they stay closed. If not, tilt
the refrigerator slightly more to the rear by turning both
leveling legs clockwise .
4.
Replace the base grille.
NOTE:
• Before moving the refrigerator away from the wall be
sure to turn the leveling legs counterclockwise so that
the weight of the refrigerator is fully transferred to the
front rollers.
• If the oor is not level and it is necessary to raise the
rear of ther refrigerator we suggest rolling the rear
rollers onto a piece of plywood or other shim material.
Door Aligning
If the space between your doors looks uneven, you can
adjust it using the following instructions:
NOTE:
Use foam door spacer to set the correct gap between
the freezer and refrigerator door. Place spacer between the
doors when tightening the freezer door top hinge.
If the freezer door is too high:
1.
Remove the hinge cap on top of the freezer door and
loosen the screws with a 5/16 “ socket and ratchet.
2.
Place the door spacer between the doors to establish
the correct gap and tighten the hinge screws.
3.
Fully tighten all screws and replace the hinge cap.
If both doors are too high:
1.
Remove the hinge cap on top of the freezer door and
loosen the screws with a 5/16 “ socket and ratchet.
2.
Loosen the two middle hinge screws with a 5/16 “
socket and ratchet.
3.
Slide the middle hinge to the left to lower the doors.
4.
Fully tighten all screws and replace hinge cap.
If both doors are too low:
1.
Remove the hinge cap on top of the freezer door and
loosen the screws with a 5/16 “ socket and ratchet.
2.
Loosen the two middle hinge screws with a 5/16 “
socket and ratchet.
3.
Slide the middle hinge to the right to raise the doors.
4.
Fully tighten all screws and replace hinge cap.
Counterclockwise to
lower refrigerator
Clockwise to raise
refrigerator
Loosen screws
Loosen screws
Loosen screws
and slide left to
lower doors
Loosen screws
and slide right to
raise doors
Door Spacer
Door Spacer
Loosen screws
Loosen screws
Loosen screws
and slide left to
lower doors
Loosen screws
and slide right to
raise doors
Door Spacer
Door Spacer
Loading ...
Loading ...
Loading ...