Loading ...
Loading ...
Loading ...
4
To start a wash programme
1 Press to turn the dishwasher on.
2 Check that the wash programme displayed is the one you would like to use. If not, press
to scroll through the wash programmes (see section ‘Changing the wash programme’
below).
3 Once the display shows the programme you would like to use, press
to start. The
display will show the approximate time remaining and the stage of the wash.
Note:
●
the default cycle when you first turn the dishwasher on is Normal
●
the dishwasher will remember the last programme used.
To pause and restart a wash programme
1 Press to pause the programme. The programme status (eg Wash) will flash while the
dishwasher is paused.
2 Open the door very slowly.
IMPORTANT!
There is a risk of being sprayed with hot water. Do not fully open the door until the
spray arms have stopped rotating.
3 Load, remove, or rearrange any dishes if needed.
4 Press to restart the programme.
If the dishwasher is not restarted within 7 minutes, it will then beep until the cycle is
restarted.
Changing the wash programme
Note: The dishwasher will remember the last programme used.
1 Press
to turn the dishwasher on.
2 Press Program to scroll to the desired wash programme.
●
The display will show the wash programme time.
3 Select a wash modifier (optional, DW60C6 models only)
●
Press to scroll between the wash modifier options. The selected wash modifier
indicator will be lit. (see ‘Selecting wash modifiers’).
4 Press to start the wash programme.
At the end of the programme the dishwasher will beep. The display will show 0.
After 30 seconds the display will turn off.
CONTROLS AND STARTING A WASH
Loading ...
Loading ...
Loading ...