Loading ...
Loading ...
WARNING
Never look at the Sun while using your binocular. Looking at the Sun can cause permanent eye damage.
Adjusting thE intErpupillAry distAncE
The interpupillary distance, or the distance between the pupils,
varies from person to person. The binocular must be correctly
aligned (adjusted) to the distance between your pupils to achieve a
single, clear image. To adjust this distance, lift the binocular up to
your eyes (using both hands) and look through them at an object in
the distance. Move the two barrels (halves) of the binocular closer
together or further apart until you see a single, clear image (Fig. 2).
Check that the interpupillary distance is set correctly every time you
use your binocular.
sEtting thE dioptEr / Focusing
To ensure a crisp, sharp image, the binocular’s focusing system must
be set to compensate for any differences in your eyesight. This is
achieved by setting the diopter (located on the right eyepiece)
before use. To set the binocular to your eyesight follow the
instructions below.
1. View an object in the distance through the binocular.
2. Cover the right objective lens with your hand or the objective
lens cap.
3. Rotate the focus wheel until the image viewed with your left eye
is clear and sharp.
4. Cover the left objective lens with your hand or objective lens cap.
5. Viewing the same object, adjust the diopter ring until the image
viewed with your right eye is clear and sharp.
Diopter
Adjustment
Ring
Focus Wheel
Fig. 3
Fig. 2
3
Loading ...
Loading ...
Loading ...