Loading ...
Loading ...
Loading ...
516
6-1. Using the air conditioning system and defogger
tized such as reducing fan
speed, etc.
Press the eco air conditioning
mode switch.
When the eco air conditioning
mode is on, the indicator illumi-
nates on the eco air conditioning
mode switch.
■ S-FLOW mode
In S-FLOW mode, priority for the
airflow is given to the front
seats, reducing the airflow and
air conditioning effect on the
rear seats.
Operation in S-FLOW mode dif-
fers according to the following
conditions:
Priority is given to the driver’s
seat only when:
• Manual S-FLOW mode:
When no passenger is judged to
be in the front passenger seat.
• Automatic S-FLOW mode:
When no passengers are judged
to be in the front passenger seat
or rear seats.
Priority is given to the front
seats when:
Manual S-FLOW mode is selected
or no passengers are judged to be
in the rear seats when in automatic
SFLOW mode.
S-FLOW mode will be dis-
abled when:
A passenger is judged to be in
a rear seat when in automatic
S-FLOW mode.
Depending on the set tempera-
ture, operation in S-FLOW
mode may not change as
described above.
When certain conditions are met
and priority is given to the
driver’s seat only, the tempera-
ture indicator for the front pas-
senger side will turn off.
Refer to P.517 for details of how
the system determines whether
there are passengers.
The following S-FLOW modes
are available:
Automatic S-FLOW mode
When a rear passenger is deter-
mined to be in the vehicle
(P.517), S-FLOW mode will be
automatically disabled.
The indicator will illuminate on the
S-FLOW mode switch when S-
FLOW mode is enabled.
To enable/disable S-FLOW mode
and enter manual S-FLOW mode,
press the S-FLOW mode switch.
Manual S-FLOW mode
When the S-FLOW mode switch
is pressed, S-FLOW mode will
be manually enabled/disabled.
The indicator will illuminate on the
S-FLOW mode switch when S-
FLOW mode is enabled.
In this mode, the system does
not determine whether a pas-
senger is in the rear seats, so S-
FLOW mode cannot be auto-
matically disabled.
To automatically disable S-FLOW
mode when opening and closing a
Loading ...
Loading ...
Loading ...