User Manual Frigidaire FRT18L4JB 18 cu. ft. top freezer refrigerator

You may need to adjust your shelves or door bins for spacing needs or simple care and cleaning.
Before adjusting the shelves and/or door bins, remove all the food items.
Remove the shelf by pulling forward to the stop position using 2 hands to avoid dropping.
Lift the front edge up and pull it out to replace the shelf.
Next, rest the side edges on any pair of shelf rails and carefully push shelf back into position. Some Top-Freezer refrigerator models have door bins (or racks) to accommodate taller or larger items.Before removing door bins (or racks) remove all the food items.
Push on the bin (or rack) sides to release from the locking tabs. Then, pull straight out to install the door bin (or rack) simply push straight ahead. You may hear the sides lock into the tabs.When cleaning shelves and/or door bins, allow any glass components to warm to room temperature before immersing in warm water to prevent damage. Simply use warm, soapy water or glass cleaner.

Setting the humidity control on your crisper drawers is not hard but we often forget what the best setting is based on the food type. Here are some helpful tips:
1.Leafy vegetables keep best when stored with the humidity control set on HIGH, or in a drawer without a humidity control. This keeps incoming air to a minimum and maintains maximum moisture.
2.
Non-leafy vegetables and fruits still in their skin should be stored with the humidity control set on LOW. It’s best to wash items and remove any excess water before placing in the crisper drawers.
3.Items with strong odors or high moisture content should be wrapped before storing.
4.If you have a refrigerator model with the Auto CrispSealTM Drawer, they are equipped with an auto humidity control on the side of each crisper under the humidity control cover. Good news – no settings needed!