Loading ...
Loading ...
Loading ...
Use
63
EN
Setting the time
When the appliance is used for the first time
or after a power failure, will
flash on the display. To be able to start any
cooking function, the current time must be set.
1. Turn the programming knob to set the
displayed hour (keep the knob turned to
produce a faster increase or decrease).
2. Press the programming knob.
3. Turn the programming knob to set the
minutes (keep the knob turned to
produce a faster increase or decrease).
4. Press the programming knob to
complete the setting.
Minute minder
1. Press the programming knob once
(twice if cooking is already in
progress). The display shows
and the indicator light
flashes.
2. Turn the programming knob to set the
duration (from 1 minute to 4 hours).
After a few seconds, the indicator
stops flashing and the countdown starts.
3. Wait for the buzzer to indicate that the
time has finished. The
indicator
flashes.
4. Turn the programming knob to select
another minute minder. Or else press
the programming knob to stop the
buzzer.
It may be necessary to change the
current time, for example for
daylight saving time. From the
stand-by position, keep the
programming knob turned to the
right or left until the hours flash.
It is not possible to change the time
if the oven is ON.
This function only activates the
buzzer, without stopping cooking.
The minute minder can be
activated both during cooking and
when the appliance is in standby.
Loading ...
Loading ...
Loading ...