Loading ...
Loading ...
Important safety instructions
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
Only use attachments / accessories specified by the
manufacturer.
Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart /
apparatus combination to avoid injury
from tip-over.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
13.
14.
Note to the CATV system installer:
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building, as
close to the point of cable entry as practical.
Example of antenna grounding as per NEC -
National Electric Code
ANTENNA LEAD IN WIRE
GROUND CLAMP
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC SERVICE EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
POWER SERVICE GROUNDING
ELECTRODE SYSTEM (NEC ART 250,
PART H)
GROUND CLAMPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Wall mount bracket kit
Brand Model # Screw dimension
65"
SANUS
F80b
M6 x 0.472” (12mm)
55"
M6 x 1.378” (35mm)
50"
43"
SAN-25BB
M4 x 1.378” (35mm) 40"
32" AST16
Your TV meets the VESA standard for wall mounting. Consult
with your local dealer for a wall mount bracket which is com-
patible with your TV model.
The recommended wall mount bracket kit (sold separately)
allows the mounting of the TV on the wall.
For detailed information on installing the wall mount, refer to
the wall mount Instruction book.
Funai is not responsible for any damage to the product or
injury to yourself or others if you elect to install the TV wall
mount bracket or mount the TV onto the bracket.
The wall mount bracket must be installed by experts.
Funai is not liable for these types of accidents or injuries
noted below.
Install the wall mount bracket on a sturdy vertical wall.
If installed onto a ceiling or slanted wall, the TV and wall
mount bracket may fall which could result in a severe injury.
Do not use screws that are longer or shorter than their
specifi ed length. If screws too long are used this may cause
mechanical or electrical damage inside the TV set. If screws
too short are used this may cause the TV set to fall.
Do not fasten the screws by excessive force. This may damage
the product or cause the product to fall, leading to an injury.
For safety reasons use 2 people to mount the TV onto a wall
mounting bracket.
Do not mount the TV onto the wall mounting bracket while your TV
is plugged in or turned on. It may result in an electrical shock injury.
When installing the unit on the wall, allow this much
space.
Top : 11.8 inches (30cm)
Left and right side : 5.9 inches (15cm)
Bottom : 3.9 inches (10cm)
Loading ...
Loading ...
Loading ...