User Manual - Page 6

For KSV25HRH. Also, The document are for others Kelvinator models: KSV35HRH, KSV50HRH, KSV71HRH, KSV90HRH, KSD25HRH, KSD35HRH, KSD50HRH, KSD71HRH, KSD90HRH

Loading ...
Loading ...
Loading ...
Mode
remiT remiT
Follow
me
Self
clean
Short
cut
LED
Swing
Direct
Turbo
ON/OFF
Fan
Quiet
Sleep
Mode
Fan/quiet
r
e
miT remiT
Follow
me
Self
clean
Short
cut
LED
Swing
Direct
Turbo
ON/OF F
6 Remote control specications
Location of the remote controller
Use the remote controller within a distance of 8 meters from
the appliance, pointing it towards the receiver. Reception is
conrmed by a beep.
W ARNING
caution
The air conditioner will not operate if curtains, doors or other
materials block the signals from the remote controller to the
indoor unit.
Prevent any liquid from falling into the remote controller. Do
not expose the remote controller to direct sunlight or heat.
If the infrared signal receiver on the indoor unit is exposed to
direct sunlight, the air conditioner may not function properly.
Use curtains to prevent the sunlight from falling on the receiver.
If other electrical appliances react to the remote controller,
either move these appliances or consult your local dealer.
Do not drop the remote controller. Handle with care.
Do
not place heavy objects on the remote controller,
or step on it.
Location of the remote controller
The remote controller can be attached to a wall or pillar by
using a remote controller holder .
Before installing the remote controller, check that the air
conditioner receives the signals properly.
Install the remote controller holder with two screws.
For installing or removing the remote controller, move it up or
down in the holder.
Remote control specications Using the remote control
Rated voltage 3.0V (2x 1.5V AAA)
Signal receiving range 8m
Loading ...
Loading ...
Loading ...