Loading ...
Loading ...
Loading ...
LUBRICATION GUIDE
Check and lubricate all components at the intervals outlined in the Periodic
Maintenance Chart. Items not listed in the chart should be lubricated at the
General Lubrication interval.
The a-arms and upper control arms are lubricated at the factory, and no
additional lubrication will be needed. However, if these components are
subjected to severe use, grease zerks have been provided for additional
lubrication at the user's discretion.
ITEM RECOMMENDED
LUBRICANT
CAPACITY AT
FLUID
CHANGE
INSPECTION PROCEDURE
Engine Oil PS-4 5W-50
4-Cycle Oil
1.9 l
(2 qt.)
Maintain level in safe range on
dipstick. See page 112.
Brake Fluid DOT 4 Brake Fluid — Maintain level between fill
lines. See page 43.
Transmission Oil AGL Gearcase
Lubricant &
Transmission Fluid
948 ml
(32 oz.)
Maintain level at bottom of fill
hole threads. See page 115.
Demand Drive Fluid
(Front Gearcase)
Demand Drive Fluid 265 ml
(9 oz.)
Maintain level at bottom of fill
hole threads. See page 117.
Front Prop Shaft
Yoke
U-Joint Grease — Grease fittings (3 pumps
maximum) every 500 miles,
before long periods of storage,
or after pressure washing or
submerging.
q
Front Prop Shaft Yoke
111
MAINTENANCE
Loading ...
Loading ...
Loading ...