Loading ...
Cleaning and Maintenance
• To ensure long lasting performance of your cleansing brush, clean the brush
head and the handle regularly.
• Ensure the cleansing brush is switched off before cleaning.
• DO NOT attempt to clean any part of this product in a dishwasher.
• DO NOT Submerge the brush handle or charging stand in water.
• Brush Head: Rinse the brush head and bristles after each use.
• Brush Handle: To clean the handle, wipe with a damp cloth.
• Charging stand: Wipe with a damp cloth.
CAUTION: Ensure all parts are dry before connecting the charger into a wall socket.
Product Disposal
• The battery must be removed from the cleansing brush before it is discarded.
• The appliance must be disconnected from the wall socket when removing
the battery.
• To remove the rechargeable battery:
• Run the cleansing brush until the motor stops.
• Remove brush head.
• Remove the two screws at the base of the handle.
• Using a small screwdriver, pry the top cap off the handle.
• Pry the battery from the internal assembly.
• Dispose of the battery safely.
Environmental Protection
To avoid environmental and health problems due to hazardous
substances in electrical and electronic goods, products marked
with this symbol must not be disposed of with unsorted municipal
waste, but recycled.
Limited Two-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due to faulty
material or workmanship for a two-year period from the original date of consumer
purchase. This warranty does not include damage to the product resulting from
accident or misuse. If the product should become defective within the warranty
period, we will replace it free of charge. Return your product and sales receipt with
your name, address and day time phone number to: Remington Returns Center, 507
Stokely Dr., P.O. Box 1, Deforest, WI 53532
. For more information call 800-736-4648
in the US or 800-268-0425 in Canada.
Warranty excludes:
• Brush head
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY
PURPOSES.
Warranty
This warranty does not cover products damaged by the following:
• Accident, misuse, abuse or alteration of the product
• Servicing by unauthorized persons
• Use with unauthorized accessories
• Connecting it to incorrect current and voltage
• Wrapping cord around product causing premature wear and breakage
• Any other conditions beyond our control
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IM PLIED
WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION TO
TWO YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
Declaration of Conformity
“This equipment has been tested and found to comply with the limits for a Consumer ISM
equipment, pursuant to Part 18 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment gener-
ates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation.”
“Please note that changes or modifications of this product is not expressly approved by the
party responsible for compliance could void the user’s authority to operate the equipment.”
“If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help. ”
“This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.”
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington
®
branded product,you
are not satisfied and would like a refund, return it with the sales slip indicating
purchase price and date of purchase to the retailer from whom it was purchased.
7 Gently glide the brush over the skin in circular
motions avoiding the delicate eye area Fig. 4.
When you feel a pause, move to the next area.
NOTE: Try to avoid applying too much pressure
with the brush when directly on the skin. If this
happens, the brush will automatically stop its cycle
and switch off. This is perfectly normal and helps
to ensure a comfortable treatment. The cleansing
brush can be restarted by pressing the On switch.
• If you wish to end the cleansing cycle early press
the On/Off button as per below:
• When using speed 1, press On/Off button 3 times
• When using speed 2, press On/Off button twice
• When using speed 3, press On/Off button once
• When not in use, store the brush attachments with the
protective caps on. Fig. 5.
• Ensure the bristles are dry before attaching the protective cap.
Replacing The Brush Heads
Removing the brush head:
• Hold the brush handle with one hand.
• With the other hand, gently pull the brush head upwards
until it comes off. Fig. 6.
• To replace the brush head, gently push the head back on until you hear a
click. Fig. 7.
• For best results, we recommend replacing the Normal brush head approximately
every 3 months.
Fig. 5
Fig. 4
Fig. 6
Fig. 7
NOTE: If you suffer from sensitive skin, we recommend selecting speed setting 1 for
the first few uses. If you do not experience any skin reactions then speeds 2 and 3
may be used.
• The Cleansing Brush also comes equipped with a one minute timer to help
ensure thorough cleansing of the whole face.
• We recommend cleansing in 3 sections: Forehead (1),
Right side (2) and Left side (3). Fig. 2.
• The cleansing brush will gently pause every 20
seconds to indicate when to move to the next zone
• The cleansing brush will automatically switch off after
60 seconds to indicate the end of the brushing time.
NOTE: If you change speed settings during cleansing, the
timer will set back to zero and the timer will start again.
How To Use
1 Select the brush head to suit your needs. Gently push
the bush head onto the cleansing brush handle until you
hear a click. Fig. 3.
2 Moisten the brush bristles by running under water.
NOTE: DO NOT use the cleaning brush while completely dry
as this can cause skin irritation.
3 Dampen your skin with water and apply cleanser onto
your skin. Alternatively, apply your cleanser directly onto
the brush.
4 Place the cleansing brush directly onto your skin.
5 Switch on using the On/Off button.
6 Select the speed:
• The cleansing brush will automatically start on speed one.
• Press the button again for speed 2
• Press the button again for speed 3.
Instructions for Use
1
Fig. 2
3
2
Fig. 3
Contains a
listed adaptor
• Replacement Brush Heads are available:
Normal: SP-FC1NA
Massage: SP-FC4NA
How to Order Parts and Accessories
Two easy ways to order spare parts and accessories are available.
• Order by Phone: U.S. Residents: 1-800-392-6544
• Order Online: RemingtonProducts.com
Spectrum Brands, Inc. will reimburse all retailers who accept the product within
30 days from the date of purchase. If you have any questions concerning the
money-back guarantee, please call 800-736-4648
in the U.S. or 800-268-0425 in Canada.
Remington Guarantees Satisfaction After 30 Days!
Remington 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
®
product, you are not
completely satisfied and would like a refund, return it with the original dated
sales receipt directly to Remington and receive a full refund.** For questions
concerning the money-back guarantee, please call 800-736-4648 in the US or
800-268-0425 in Canada.
*Applies to US and Canadian customers’ returns only.
**Terms and conditions apply.
1. Refund will be in the form of a check issued in US Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington and postmarked no later than
60 days after purchase of the Remington
®
product:
a. The Remington
®
product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned product
was used in accordance with the instruction booklet (included with the product
at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or
damaged product.
7. Please allow 4-6 weeks to receive your refund by check.
Questions or comments: Call 800-736-4648 in the US
or 800-268-0425 in Canada. Or visit RemingtonProducts.com
Electrical Characteristics: FC1000 100-240V~ 50/60Hz 200mA
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
TM Trademark of Spectrum Brands, Inc.
© 2016 Spectrum Brands, Inc. 9/16 15911-00
Made in China
T22-0004616-A