Loading ...
Loading ...
Loading ...
16 17
Container
To prepare your new machine for initial use, follow the steps below:
Normal Cleaning:
1. Fill the container half full with warm water and add a couple of drops of washing-up
liquid to the container. Snap or push the complete 2-Part lid into the locked position.
2. Select Variable Speed 1. Turn the machine on and slowly increase the speed to
Variable Speed 10, then to High. Run the machine on High speed for 30–60
seconds.
3. Turn o the machine and rinse and drain the container.
To Sanitize:
1. Follow the Normal Cleaning instructions above.
2. Fill the container half full with water and 1½ teaspoons of liquid bleach. Snap
or push the complete 2-Part lid into the locked position.
3. Select Variable Speed 1. Turn the machine on and slowly increase the speed to
variable speed 10, then to High. Run the machine on High speed for 30 to 60
seconds.
4. Turn o the machine and allow the mixture to stand in the container for an
additional 1½ minutes. Pour the bleach mixture out. Allow the container to air
dry. Do not rinse after sanitizing.
Lid, Lid Plug and Tamper
Separate the lid and lid plug. Wash the parts in warm, soapy water. Rinse clean
under running water and dry. Reassemble before use.
IMPORTANT: To ensure continued and effective performance, do not put the
container, lid, lid plug or tamper in the dishwasher.
CARE AND CLEANING
CARE AND CLEANING
Motor Base
1. Unplug the power cable.
2. Wash the outside surface with a damp, soft cloth or sponge that has been rinsed
in a mild solution of washing-up liquid and warm water. Do not place the motor
base in water.
3. The centring pad can be removed for more thorough cleaning.
4. Thoroughly clean the switches so that they work freely. They may become sticky
from use. Moisten a cotton bud with a household degreaser or cleaner and clean
the grooves around the switches. Immediately dry all surfaces.
5. Polish with a soft cloth.
WARNING
Electrical Shock Hazard.
Always unplug before cleaning the
motor base or when not in use.
Do not put the motor base in water or
otherliquid.
Failure to follow instructions can cause
death or electrical shock.
This product has been supplied from an environmentally
aware manufacturer.
This product may contain substances that could be harmful
to the environment if disposed of in places (landfills)
thatare not appropriate according to legislation.
The 'crossed-out wheelie bin' symbol is placed on this
product to encourage you to recycle wherever possible.
Please be environmentally responsible and recycle this
product through your recycling facility at the end of its life.
RECYLCING INFORMATION
Loading ...
Loading ...
Loading ...