Loading ...
Loading ...
Loading ...
4
OPERATING INSTRUCTIONS
• Remove water tank by grasping firmly and pull upwards.
• Turn water tank over and turn the cap counter-clockwise to open. Fill with COOL tap water or
DISTILLED water. DO NOT USE HOT WATER. Do not add fragrance or oil in the water – it will cause
malfunction of the unit!
• Replace the fill cap by turning clockwise – do not over tighten.
NOTE: When carrying a filled water tank, place one hand under for support.
• Place water tank back in place, making sure the tank is correctly aligned with the body.
• Plug in power source and the Power Indicator will light up.
• Turn the Power/Mist Intensity knob clock wise to turn on. You will hear a “click”.
• To adjust mist intensity, turn the Power/Mist Intensity knob accordingly. Farthest right is highest mist
output.
NOTE:
• Once the water tank is in place, do not attempt to move the humidifier. If it has to be moved, unplug
the unit and drain water from the base before moving.
• Once the water tank is in place or during operation, do not attempt to pick up the water tank. To move
the unit or add water to the tank, first unplug power and drain water from the base.
• Pay attention to the water level - add water when low.
STORAGE
• Save the box for off-season storage.
• Clean the tank, reservoir and all part thoroughly and dry before storage.
• If water is left in the unit during storage, it may harden and leave deposits that may affect the unit
from operating properly.
• Leave the cap of the water tank loose. This will prevent the cap and gasket from sticking together and
prolong the life of the gasket.
TROUBLESHOOTING
1. Unit is not producing mist.
•
Check if unit is powered on.
•
Turn the mist intensity level higher (clockwise)
•
Check if water is in the tank.
•
If there is water in the tank, the water level in the base is too full. Unplug unit, remove tank and
pour out water in the base.
•
Check if water tank is properly placed onto the body.
Loading ...
Loading ...