Loading ...
Loading ...
Loading ...
7
PROGRAMMING YOUR
COFFEEMAKER
SETTING THE CLOCK
When the coffeemaker is plugged in,
12:00 will appear until you set the time.
Hold down the Hour or Minute button until
the clock begins flashing. Press either
button to select the desired time. Hold
buttons down to scroll through the digits,
or press and release to advance one digit
at a time. When scrolling, the numbers will
advance slowly and then speed up. When
the number displayed approaches the
desired time, press and release to advance
one digit at a time. Be sure the PM
indicator is on if a PM time is desired.
SETTING THE AUTO ON TIME
1. Press and hold the Program (PROG)
button until the display flashes. You
are now in program set mode.
2. Follow directions under SETTING
THE CLOCK (above) to program your
start-brew time.
3. Press the start button to exit program
set mode. Mode will be exited
automatically if no button is pushed.
The green indicator light should be
illuminated to indicate that the Auto
On function is on.
NOTE: To start brew time at the same time
the next day, simply press PROG. When
green indicator light comes on, brewing will
start at the time you’ve selected.
SETTING THE AUTO OFF TIME
1. Press and release the AUTO-OFF
button until the display flashes.
2. Follow directions under SETTING
THE CLOCK (above) to program your
coffeemaker to shut off from 0 to 4
hours after brew cycle is finished.
CHARCOAL WATER FILTER
Your coffeemaker comes with a
charcoal water filter that eliminates
chlorine, bad tastes and odors from
tap water.
Inserting the Water Filter
• Remove the filter from polybag and
soak it, fully immersed, in cold tap
water for 15 minutes.
• Lift the water filter holder out of the
water reservoir (see diagram, page 5).
• Press down on the filter compartment
and pull toward you to open.
• Place filter into the holder and snap
it closed. Be careful – improper
placement can tear the filter skin.
• Flush filter by running cold tap water
through holes in bottom of
compartment for 10 seconds.
• Allow the filter to drain completely.
• Slide the water filter holder back into
the channel in the water reservoir,
pushing it down to the base of the
unit.
NOTE: We recommend
changing the water filter
every 60 days or after
60 uses, and more
often if you have
hard water.
Replacement filters
can be purchased in
stores, by calling
Cuisinart
®
Customer
Service, or at
www.cuisinart.
com.
Loading ...
Loading ...
Loading ...