Loading ...
Loading ...
Loading ...
24
Sliding Shelves (in some models)
You can slide some of the shelves in your refrigerator
towards inside or outside like explained below.
•To slide the shelf towards the outside: Pull towards you,
figure A.
•To slide the shelf towards the inside: Push until it
stops, figure B.
Figure A Figure B
In order to remove a shelf from a metal frame
•Pull the shelf until it stops.
•Incline the front of the shelf towards the top and pull
forward.
•Lift the shelf in the manner it moves across the
support openings.
To put back into place just reverse these steps.
Functional Shelves (Folding Shelves, in some models)
You can store tall articles like gallons or bottles just by
simply folding the shelf in half.
PANTRY (in some models)
For storage of meat or fresh food. Adjust the control to
desired temperature by moving from COLD to COLDER.
Pull forward to open. Lift slightly and pull it out to remove.
CRISPER HUMIDITY CONTROL (in some models)
For the conservation of fruits you can control and adjust
the humidity level (high or low) in the drawers.
•“High”: Allows air to leave the vegetable drawer for the
best conservation of fruits.
•“Low”: Allows air to be stored in the drawer for the best
conservation of vegetables.
To remove the crisper:
•Slide crisper straight out to the stop.
•Lift the front of the crisper, then pull it out to remove
•Replace the crisper by sliding it back in fully past the
drawer stop.
CAUTION: Be careful when you handle the glass
cover because it could loose.
To remove the glass:
•Lift up the glass after inserting a screwdriver under the
crisper cover.
•Pull glass cover up and out.
To remove the crisper cover support:
NOTE: Remove glass before removing the crisper cover
support.
•While holding the crisper cover support with both
hands (as shown in the image below). Pull forward and
slightly lift the front part.
I
II
I
I
II
USING YOUR REFRIGERATOR USING YOUR REFRIGERATOR
Loading ...
Loading ...
Loading ...