Loading ...
Loading ...
Loading ...
The furniture door
The door on this appliance is designed for the overlay or
a panel having the following dimensions:
Width: 596 mm
Height: 604 mm max
Thickness: 20 mm max
Weight: 2 - 7.5 kg max
The panel height should be no more than indicated,
otherwise complete opening of the door will no longer
be possible as the panel hits against the dishwasher
plinth.
Furthermore, it is possible to line up the control panel to
correspond with the height of the drawers of the
adjacent pieces of furniture, thus perfectly co-ordinating
with style of the rest of the unit furniture in your
kitchen.
Add one or more of the fillets provided until you reach
the desired height.
Secure the fillets as shown in the picture, by means of
two screws 4 x 40 provided therewith.
Prepare the panel as follows:
Measure the distance (B) between the part below the
control panel (or fillets) and the reference notch (X) on
the door.
Measure the same distance (B) on the wooden panel
starting from the upper edge.
At this distance position the supporting cross-bar
provided, in correspondence with the reference (Z).
Keep the same distance between the centre of the
support’s fastening holes and the lateral edges of the
wooden panel.
On the panel sign the seats for the four fastening screws.
Drill the panel with a Ø 2 x 12 bit and fix the supporting
cross-bar onto the wooden panel with the 3.5 x 16
screws provided.
Mount the decor panel by inserting the two pivots of the
cross-bar into the slotted holes of the door.
Lift the decor panel until the perfect alignment with the
facia panel is obtained.
Once the correct position has been found, open the door
and fasten the decor panel on the lower section by
means of the two 4 x 40 screws provided, using the
holes through the inner door.
28
PFI05UK
II04
A
A
B
Z
X
=
=
550
B
2
1
II22
II10
Loading ...
Loading ...
Loading ...