Loading ...
Loading ...
Loading ...
Problem Possible solution
The appliance stops during opera-
tion.
Make sure that the water container is emp-
ty. Press Start/Pause to start the pro-
gramme again.
The display shows a long pro-
gramme duration.
1)
Follow guide in program table depending
on size and type of load
Make sure that the filter is clean.
The laundry is too wet. Spin the laundry in
the washing machine again.
Make sure that the room temperature is
not too warm.
The display shows a short pro-
gramme duration.
Set the Time Drying or the Extra Dry pro-
gramme.
The display shows Err. If you want to set a new programme, de-
activate and activate the appliance.
Make sure that the options are applicable
to the programme.
The display shows E51) Deactivate and activate the appliance.
Start a new programme. If the problem oc-
curs again, contact the Service.
1)
After maximum 5 hours, the programme ends automatically
11.1 If the drying results are not
satisfactory
• The set programme was incorrect.
• The filter is clogged.
• The condenser is clogged.
• There was too much laundry in the ap-
pliance.
• The drum is dirty.
• Incorrect setting of the conductivity
sensor.
• The airflow slots are clogged.
12. TECHNICAL DATA
Dimensions (mm) Width / Height / Depth 600 x 850 x 540 mm
(maximal 575 mm)
Max. depth
(with the appliance door open)
1030 mm
Max. width
(with the appliance door open)
950 mm
Electrical connection Voltage 230-240 V
Frequency 50 Hz
Fuse 10 A
Total power 2250 W
Drum volume 104 l
14
www.electrolux.com
Loading ...
Loading ...
Loading ...