Loading ...
Loading ...
Loading ...
Fault, what to do? en
37
Door does not open
automatically at the end of
the Eco 50° programme.
Eco drying deactivated. Activate Eco drying (see chapter “Operating
the appliance”).
Button lock has been activated. * Deactivate button lock (see chapter “Safety
information”). *
Eco 50° programme not
selected.
Select Eco 50° programme.
Additional functions selected. Deselect additional functions.
Intensive drying switched on. Switch off intensive drying.
Door is not set correctly. Set the door correctly with the aid of the
installation instructions so that the door gap
is min. 70 mm - 100 mm.
Door and door seal dirty. Clean door and door seal with a damp cloth
and a little washing-up liquid.
Wrong screws used to adjust the
door gap. If excessively long
screws are screwed in, they may
deactivate Eco drying.
To adjust the door gap, use screws which
have a max. size of ø 4X30 (included in the
product package, see installation
instructions).
Safety device switches the Eco
drying function off. A technical
fault has probably occurred.
Call the after-sales service.
The door is difficult to
open.
Child-proof lock is activated. Deactivate the child-proof lock.
Door cannot be closed. Door lock has been activated. Close door with increased force.
Door cannot be closed due to
installation.
Check appliance installation: Door
or attached parts must close without
obstruction.
Cover on the detergent
dispenser cannot be
closed.
Detergent dispenser or cover
guide blocked by sticky detergent
residue.
Remove detergent residue.
Detergent residue in the
detergent dispenser or in
the tablet collecting tray.
Spray arms blocked by utensils,
therefore detergent is not rinsed
out.
Ensure that the spray arms can rotate freely.
The detergent dispenser was
damp when filled.
Pour detergent into the dry detergent
dispenser only.
Fault Reason Remedial action
Loading ...
Loading ...
Loading ...