Loading ...
Loading ...
Loading ...
E175447
3. Block both the front and rear of the
wheel diagonally opposite the flat tire.
For example, if the left front tire is flat,
block the right rear wheel.
4. Lift and remove the carpeted load floor
panel to access the minispare and jack
kit.
5. Remove the wing nut securing the
spare tire by turning it
counterclockwise.
6. Remove the spare tire and jack kit from
the spare tire compartment.
E178186
7. Remove plastic wing nut and jack and
lug wrench assembly.
8. Detach the lug wrench from the jack
by turning the jack hex nut drive screw
counterclockwise. This will lower the
jack and loosen the mechanical lock.
E181744
9. Unfold the wrench for use.
E175694
10. If your vehicle has wheel trim covering
the lug nuts, use the tool provided
with the jack assembly to remove the
wheel trim.
E294584
11. Loosen each wheel lug nut one-half
turn counterclockwise, but do not
remove them until the wheel is raised
off the ground.
12. If your vehicle has a warning triangle
and you are jacking the vehicle on the
roadside shoulder, set the warning
triangle upright on the shoulder of the
road facing the direction of oncoming
traffic.
339
Edge (CDQ) Canada/United States of America, enUSA, Edition date: 201907, First-Printing
Wheels and Tires
Loading ...
Loading ...
Loading ...