Loading ...
Loading ...
Loading ...
Time-setting options en
13
OTime-setting options
Ti me- set t i ng opt i ons
Your hob has two timer functions:
■ Programming the cooking time
■ Kitchen timer
Programming the cooking time
The hotplate automatically switches off after the time
that is set has elapsed.
Setting procedure:
1. Select the hotplate and the required heat setting.
2. Touch the 0 symbol twice. The x indicator for the
hotplate lights up. ‹‹ lights up in the timer display.
3. Within the next 10 seconds, set the required cooking
time in the settings range.
After a few seconds, the time begins to elapse.
Note: The same cooking time can be set automatically
for all hotplates. The set time for each of the hotplates
counts down independently.
You can find information on automatically programming
the cooking time in section ~ "Basic settings"
Changing or cancelling the time
Select the hotplate and then press the 0 symbol.
Change the cooking time using the programming zone
or set to ‹‹ in order to cancel the time.
Once the time has elapsed
The hotplate switches off. A warning signal sounds. The
time program function lights up ‹‹ for 10 seconds in
the display.
When the 0 symbol is pressed, the indications turn off
and the beeping stops.
Notes
■ If a cooking time was programmed for several
hotplates, the time information for the selected
hotplate is shown in the timer display.
■ You can set a cooking time of up to 99 minutes.
The kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes.
This functions independently from the hotplates and
from other settings. This function does not automatically
switch off a hotplate.
Setting procedure
1. Touch the 0 symbol repeatedly until the V
indicator lights up. ‹‹ lights up on the timer display.
2. Set the required time in the control panel.
After a few seconds, the time begins to elapse.
Changing or deleting the time
Touch the 0 symbol repeatedly until the V indicator
lights up. Change the time in the control panel or set it
to ‹‹.
When the time has elapsed,
An audible signal sounds. ‹‹ appears in the timer
display and the V indicator lights up. The displays go
out after 10 seconds.
When the 0 symbol is touched, the indicators go out
and the acoustic signal ceases.
Stopwatch function
The stopwatch function displays the time that has
elapsed since activation.
This functions independently from the hotplates and
from other settings. This function does not automatically
switch off a hotplate.
Activating
When you touch the 0, the þ indicator lights up.‹‹
lights up in the timer display.
Then slide your finger across the control panel.
The cooking time begins to elapse.
Deactivating
Touch the 0 symbol; the þ display lights up.
Slide your finger over the control panel. ‹‹ appear in
the timer display and then go out.
The function is deactivated.
Loading ...
Loading ...
Loading ...