Loading ...
Loading ...
Loading ...
^
For extraction mode you must also
drill a 6
3
/
4
" (170 mm) hole through
the bottom of the cabinet.
^
If you want to lay the power cord
though the cabinet you must drill a
hole for it, too.
^ Lift the hood up under the cabinet
and feed the power cord through the
respective hole in the bottom of the
cabinet.
^
From the inside of the cabinet, fasten
the hood to the cabinet using the
screws provided.
^
Put the grease filter back in place.
Wall mounting
You can also mount the device to a wall
using the two wall anchors.
,
The screws and dowels are
suitable for solid brick walls.
For other types of walls, use
appropriate materials.
Make sure that the wall can support
the weight.
^
Fasten the cut-out drill template to
the wall. The template's upper edge
marks the upper edge of the hood.
Observe the safety clearance (S) to
the cooktop (see "Appliance
dimensions").
^
Mark and drill the four holes
(C 8 mm) for the wall anchors.
^
Remove the drill template.
Installation
24
Loading ...
Loading ...
Loading ...