Loading ...
Loading ...
Loading ...
12
BEFORE USING FOR THE FIRST TIME
1. Removeallofthevariouspackaging,stickersoraccessoriesfromboththeinsideand
outsideofthekettle.
2. Adjustthelengthofthecordbywindingitunderthebase.Wedgethecordintothe
notch.(g 1)
Throwawaythewaterfromthefirsttwo/threeusesasitmaycontaindust.Rinsethe
kettleandthefilterseparately.
USE
1. TO OPEN THE LID, ACCORDING TO THE MODEL
Hingedlid:pressifnecessaryonthelockingsystemandpullbackwards.(g 2)
Assistedopeninglid:pressonthelockingsystemandthelidliftsautomatically.(g 3 / g 3.1)
Automaticopeninglid:pressthebuttonatthetopofthehandle.(g 4)
Lockablelid:turnthelidtothelefttounlockitandliftit.(g 5)
Toclosethelid,pressitdownfirmlyorturnittotherightinthecaseofthelockablelid.
•
Removablelid:donotuseyourkettlewithoutitslid.Incasethelidislostorbroken,
pleasecontactyourafter-salesservicecenter.(g 5.1)
2. PLACE THE BASE ON A FLAT, STABLE, HEAT-RESISTANT SURFACE AWAY FROM
WATER SPLASHES AND ANY SOURCES OF HEAT.
•
Kettleisonlytobeusedwiththestandprovided.
3. FILL THE KETTLE WITH THE DESIRED AMOUNT OF WATER. (g 6)
•
Youcanfillitthroughthespout,whichensuresbettermaintenanceofthefilter.
(accordingtothemodel)
•
Neverfillthekettlewhenitisonitsbase.
•
Donotfillitabovethemaximumlevel,orbelowtheminimumlevel.Ifthekettleistoo
full,boilingwatermayspillout.
•
Donotusewithoutwater.
•
Checkthatthelidisclosedproperlybeforeuse.
4. POSITION THE KETTLE ON ITS BASE. PLUG IT INTO THE MAINS SOCKET.
5. FOR KETTLES THAT FEATURE A TEMPERATURE SWITCH
Selectthetemperatureaccordingtoyourneeds:
Position
forboilingwaterorposition fortheidealtemperaturefordrinking
immediately.(g 7)
6. TO START THE KETTLE
Presstheon/offbuttonpositionedonthetoporthebottomofthehandleaccordingto
themodel.(g 8)
coveredbytheguarantee.
Loading ...
Loading ...
Loading ...