Loading ...
Loading ...
Loading ...
Lights
Headlight Aiming
The headlights were properly aimed
when your car was new. You should
check their aim if you regularly carry
heavy items in the trunk or pull a
trailer. Each headlight assembly has
horizontal and vertical adjustment
indicators. These are set to their "0"
positions after the headlights are
aimed at the factory.
To check these settings:
1. Make sure the fuel tank is full.
Park the vehicle on level ground.
2. The driver or someone who
weighs the same should he sitting
in the driver's seat for all checks
and adjustments.
Load the trunk with the items you
normally carry.
HORIZONTAL ANGLE GAUGE
If you usually pull a trailer, load it as
you would normally and attach it to
the car. Push down on the front and
rear bumpers several times to make
sure the car is sitting normally.
3. Open the hood.
4. Check the horizontal angle gauge.
The line on the adjustment screw
indicator should line up with the
"0" mark on the gauge.
VERTICAL ANGLE GAUGE
5. Check the vertical angle gauge.
The bubble should be centered
underneath the longest scribe
mark on the gauge.
Maintenance
CONTINUED
BUBBLE
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...