Loading ...
Loading ...
Loading ...
Problem Possible cause Remedy
The flexible induction
cooking area does not heat
up the cookware.
The cookware is in the
wrong position on the flexi‐
ble induction cooking area.
Place the cookware in the
correct position on the flex‐
ible induction cooking
area. The position of the
cookware depends on the
activated function or func‐
tion mode.
Refer to "Flexible induction
cooking area" chapter.
The diameter of the bottom
of the cookware is incor‐
rect for the activated func‐
tion or function mode.
Use cookware with diame‐
ter applicable to the activa‐
ted function or function
mode. Use cookware with
diameter smaller than 160
mm on a single section of
the flexible induction cook‐
ing area.
Refer to "Flexible induction
cooking area" chapter.
comes on.
Automatic Switch Off oper‐
ates.
Deactivate the hob and ac‐
tivate it again.
comes on.
The Child Safety Device or
the Lock function operates.
Refer to "Daily use" chap‐
ter.
comes on.
There is no cookware on
the zone.
Put cookware on the zone.
The cookware is incorrect. Use the correct cookware.
Refer to “Hints and tips”
chapter.
The diameter of the bottom
of the cookware is too
small for the zone.
Use cookware with correct
dimensions.
Refer to “Technical infor‐
mation” chapter.
FlexiBridge function oper‐
ates. One or more sections
of the function mode which
operates are not covered
by the cookware.
Place the cookware on the
correct number of sections
of the function mode which
operates or change the
function mode.
Refer to "Flexible induction
cooking area" chapter.
PowerSlide function oper‐
ates. Two pots are placed
on the flexible induction
cooking area.
Use only one pot.
Refer to "Flexible induction
cooking area" chapter.
www.electrolux.com20
Loading ...
Loading ...
Loading ...