Loading ...
Loading ...
Loading ...
91
uuIndicatorsu
Continued
Instrument Panel
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
Indicator Name On/Blinking Explanation Message
*
Smart Entry
System
Indicator
*
●
Comes on for a few seconds when
you set the power mode to ON,
then goes off.
●
Comes on as soon as a problem is
detected in the smart entry system
or push button starting system.
●
Stays on constantly or does not come
on at all - Have your vehicle checked by
a dealer.
System
Message
Indicator
*
●
Comes on for a few seconds when
you turn the ignition switch to ON
(w
*1
, then goes off.
●
Comes on along with a beep when
a problem is detected. A system
message on the multi-information
display appears at the same time.
●
While the indicator is on, press the
(information) button to see the
message again.
●
Refer to the Indicators information in this
chapter when a system message appears
on the multi-information display. Take
the appropriate action for the message.
●
The multi-information display does not
return to the normal screen unless the
warning is canceled, or the
button is pressed.
—
Turn Signal
and Hazard
Warning
Indicators
●
Blinks when you operate the turn
signal lever.
●
Blink if you press the hazard
warning button.
●
Does not blink or blinks rapidly - A
turn signal light bulb has blown. Change
the bulb immediately.
2 Replacing Light Bulbs P. 537, 540, 541
—
High Beam
Indicator
●
Comes on when the high beam
headlights are on.
— —
* Not available on all models
19 HR-V HDMC HDMG-31T7A6300.book 91 ページ 2018年6月1日 金曜日 午後1時14分
Loading ...
Loading ...
Loading ...