Loading ...
Loading ...
Loading ...
25
5. LightSensor
Hot key Sensor distance
3
Landscape/Portrait mode
ATTENTION
PowerSensor off
ATTENTION
PowerSensor off
Above illustrations are for reference purpose only, may not reect the
exact display of this model.
How to adjust settings
If PowerSensor is not operating correctly
inside or outside the default range, here’s how
to fine-tune detection:
• Press the PowerSensor hot key.
• You will find the adjustment bar.
• Adjust the PowerSensor detection
adjustment to Setting 4 and press OK.
• Test the new setup to see if PowerSensor
properly detects you in your current
position.
• PowerSensor function is designed to work
in Landscape mode (horizontal position)
only. After PowerSensor turn on it, it will
automatically turn Off if the monitor
is used in Portrait mode (90 degree/
vertical position); it will automatically turn
ON if monitor is returned to its default
Landscape position.
Note
A manually selected PowerSensor mode
will remain operational unless and until it is
readjusted or the default mode is recalled. If
you nd that the PowerSensor is excessively
sensitive to nearby motion for some reason,
please adjust to a lower signal strength.
5. LightSensor
(Available for 221P6QPYE, 221P6QPYKE)
What is it?
Light Sensor is a unique and intelligent way of
optimizing picture quality by measuring and
analyzing the incoming signal to automatically
adjust picture quality settings. Light Sensor
uses a sensor to adjust the picture brightness
depending on the room light conditions.
How to enable LightSensor?
1. Press button on the front bezel to
enter OSD menu screen.
2. Press ▲ or ▼ button to select main menu
[LightSensor], then press button OK .
3. Press ▲ or ▼ button to turn on or off the
LightSensor.
Loading ...
Loading ...
Loading ...