Loading ...
Loading ...
Loading ...
- 9 -
C = SPEED I
D = SPEED II
E = SPEED III
F = AUTOMATIC STOP TIMER - 15 minutes (*)
• If your appliance has the INTENSIVE speed function, press key E for two seconds and
it will be activated for 10 minutes after which it will return to the previously set speed. When the
function is active the LED flashes. To interrupt it before the 10 minutes have expired press key E
again.
• By pressing key F for two seconds (with the hood switched off) the “clean air” function is activated.
This function switches the appliance on for ten minutes every hour at the first speed. As soon as this
function is activated the motor starts up at the first speed for ten minutes, During this time key F and
key C must flash at the same time.
After ten minutes the motor switches off and the LED of key F remains switched on with a fixed light
until the motor starts up again at the first speed after fifty minutes and keys F and C start to flash
again for ten minutes and so on.
By pressing any key for the exclusion of the hood light the hood will return immediately to its normal
functioning (e.g. if key D is pressed the “clean air” function is deactivated and the motor moves to
the 2nd speed straight away. By pressing key B the function is deactivated).
(*) The “automatic stop timer” delays stopping of the hood, which will continue functioning for 15
minutes at the operating speed set at the time this function is activated.
• Active carbon/grease filter saturation:
- When button A flashes at a frequency of 2 seconds, the grease filters must be cleaned.
- When button A flashes at a frequency of 0.5 seconds, the carbon filters must be replaced.
After the clean filter has been replaced, the electronic memory must be reset by pressing button A
for approximately 5 seconds, until the light on the button stops flashing.