Loading ...
Loading ...
Loading ...
9
The probe should be cleaned by hand with a damp towel
or sanitary wipe. The probe is not dishwasher safe. Take
precaution not to get the wiring of the probe wet.
Be sure to avoid water exposure to the wiring of the probes
as well as the area where the wiring and crimp meet the
probe. The probe is not waterproof and damage may result
from water exposure. The probe should never be submersed
in water.
Temperatures below -22°F or above 572°F (-30ºC or above
300ºC) will not display in the Weber
iGrill App and will cause
the probe to disappear from connection.
Probe Wrap Use
To wrap your probe:
• Hold the probe wrap so that the clip segment is on the bottom left
and the logo is legible in the center of the probe wrap.
• Snap the probe into the clip of the probe wrap, ensuring that the
probe’s body follows the contour of the probe wrap and leaves a
½ inch gap between the probe and the wire channel of the probe
wrap. The tip of the probe should be pointed downward.
• Wrap the wire of your probe clockwise around the probe wrap.
• When you reach the adapter end of the probe wire, it can be
inserted into the probe wrap’s wire channel to secure the wrapping.
Using the iGrill Mini
Smart LED
The Smart LED allows the iGrill Mini to display the connected probe
temperature reading through the use of color. Below is a list of all of the
light combinations you will see on the Smart LED and their associated
meanings:
Loading ...
Loading ...
Loading ...