Loading ...
Loading ...
Loading ...
6
COOKER HOOD INSTALLATION
Refer to “Safety information” chapter.
Before the installation of the appliance, record the information
below from the rating plate. The rating plate is on the bottom
of the appliance casing.
Model:
PNC:
Serial number:
1. Using a spirit level mark a vertical centre line on the
wall where the cooker hood is to be positioned, and a
horizontal line at the cooker hood base position (refer to
diagram below).
NOTE: The height of the underside of the hood body must
be a minimum of 600mm* to a maximum height of 800mm.
* If the instructions of the cooktop specify a greater distance than the minimum
above, then that shall be the minimum height for installation.
2. Mark the location for flue cover wall mounting brackets
and cooker hood mounting points and anti-tilt fixing
points above the hood base using the hood base as
the reference point (Fig. 6).
ceiling
Max. 1164mmDIM. A
View A
installation wall
360mm
200mm
485.6mm
678.5mm
Cooker hood
mounting points
Top of cooktop
240mm 21mm
View A
Cooktop
type
DIM. A
minimum* maximum
Gas 650mm 800mm
Electric 600mm 800mm
Loading ...
Loading ...
Loading ...