User Manual KitchenAid KCGD500GSS 30" 4 Burner Gas Downdraft Cooktop

Documents for KitchenAid KCGD500GSS

The following documents are available:
User Manual Photos
KCGD500GSS photo
30" AND 36" (76.2 CM AND 91.4 CM)
GASDOWNDRAFT COOKTOP
Use and Care Guide
For questions about features, operation/performance, parts, accessories or service, call: 1-800-422-1230
or visit our website at www.kitchenaid.com
In Canada, call 1-800-807-6777 or visit our website at www.kitchenaid.ca.
TABLE DE CUISSON À GAZ À EXTRACTION PAR
LE BAS DE 30" (76,2 CM) OU DE 36" (91,4 CM)
Guide d’utilisation et d’entretien
Pour des questions à propos des caractéristiques, du fonctionnement/rendement, des pièces, des accessoires ou du service,
composez le : 1-800-422-1230 ou visiter notre site internet sur www.kitchenaid.com.
Au Canada, pour assistance, installation ou service, composer le 1-800-807-6777 ou visiter notre site Web au www.kitchenaid.ca.
W10848423B
Loading ...
Loading ...
Loading ...

Specifications

KitchenAid KCGD500GSS Questions and Answers


#1 can i use propane with this cooktop

the cooktop is designed to use with either natural gas or propane. There is a conversion kit that will be needed to convert it to propane. We only recommend using a qualified gas installer to make the change, however.

#2 Does this stove top come in white?

No, this model does not come in white at this time. We would be happy to pass this along for future consideration.

#3 Can the burners be lit with match in case of poeer outage

In case of prolonged power failure, the surface burners can be lit manually. Hold a lit match near a burner and turn knob counterclockwise to the Ignite position. After burner lights, turn knob to setting. The vent fan will not work.

#4 We are replacing a JennAir electric cooktop which has a 29 1/16 x 21 1/16 cutout. Will this gas cooktop fit this opening or will some type of spacers

to determine if this unit would fit in the cutouts you have we would recommend to review the installation instructions for the best direction on if this would fit in your existing cutout