Loading ...
Loading ...
Loading ...
33
ENGLISH
Before calling for service (cont.)
Drying time is not
consistent
clothing is not consistent.
of heat used (electric, natural gas, or LP gas), the size of the load, the type of
fabrics, the wetness of the clothes, and the condition of the exhaust ducts and
lint filter.
Clothes take too
long to dry
too long.
tripped, or power outage has occurred.
longer to dry.
To help reduce and maintain more consistent drying times for large and heavy
fabrics, separate these items into smaller loads of a consistent size.
produce high amounts of lint, it may be necessary to clean the filter during the
cycle.
lint, and obstructions. Make sure that outside wall dampers can open properly
and are not blocked, jammed, or damaged.
problem is a circuit overload, have it corrected by a qualified electrician.
tumbling action.
Clothes are wrinkled
ends.
time, and remove items while they still retain a slight amount of moisture.
up to 3 hours.
Clothes are shrinking
followed.
your garment, because some fabrics will naturally shrink when washed. Other
fabrics can be washed but will shrink when dried in a dryer. Use a low or no
heat setting.
FLOW SENSE
TM
indicator shows four
bars during the drying
cycle
restrictions.
lint buildup or debris.
the external dryer venting.
Dryer can be used in this condition, but drying times may be longer.
TM
system, the indicator
will remain on for two hours after the end of the cycle. Opening the door or
pressing the POWER button will turn off the display.
TROUBLESHOOTING TROUBLESHOOTING
MFL62512884_en_120518.indd 33 2012.5.18 9:30:32 AM
Loading ...
Loading ...
Loading ...