Loading ...
Loading ...
Loading ...
−
Connect the second jumper cable
to the negative ( ) terminal on
the booster battery. Connect the
other end to the grounding strap
as shown. Do not connect this
jumper cable to any other part of
the engine.
The numbers in the illustration show
you the order to connect the jumper
cables. Make sure to disconnect the
cables in the reverse order.
If the booster battery is in another
vehicle, have an assistant start
that vehicle and run it at a fast idle.
Once your car is running, discon-
nectthenegativecablefromyour
car, then from the booster battery.
Disconnect the positive cable from
your car, then the booster battery.
Start your car. If the starter motor
still operates slowly, check the
jumper cable connections to make
sure they have good metal-to-
metal contact.
Keep the ends of the jumper cables
away from each other and any metal
on the vehicle until all are
disconnected. Otherwise, you may
cause an electrical short.
5.
4.
6.
7.
Jump Starting
Taking Care of the Unexpected
271
BBOOOOSSTTEERR BBAATTTTEERRYY
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...