Loading ...
Loading ...
Loading ...
3
a. Control parts description:
1. Timer 2. Body oscillating switch 3. Speed switch
b. Instructions:
1. Plug the power cord into a wall outlet.
2. The air flow can be set to oscillate to left or right by
pushing the button of body oscillating switch (2).
If you want to stop oscillation, push it again.
3. Automatic 120-minute timer. Turn the knob of the
timer (1) to the desired time you want, the fan will
stop when the time is over. The longest time set is
120 minutes. If the timer is not required and
constant fan operation is required, then set Timer
to “ON” position.
4. Speed is controlled by selecting the speed switch (3) on the top of the body.
There are 4 positions: OFF ; 1--Low ; 2--Medium ; 3--High
OPERATION INSTRUCTION
0
4080
120
ON
3
2
1
The fan requires little maintenance. Do not try to fix it by yourself. Refer it to
qualified service personnel if service is needed.
1. Before cleaning and assembling, fan must be unplugged.
2. To ensure adequate air circulation to the motor, keep vents at the rear of the
motor free of dust. Do not disassemble the fan to remove dust.
3. Please wipe the exterior parts with a soft cloth soaking a mild detergent.
4. Do not use any abrasive detergent or solvents to avoid scratching the surface.
Do not use any of the following as a cleaner: gasoline, thinner, bending.
5. Do not allow water or any other liquid into the motor housing or interior parts.
MAINTENANCE INSTRUCTION
CLEANING
1. Be sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with a soft cloth moisten with mild soap.
Thoroughly remove soap film with dry cloth.
Loading ...