Loading ...
Loading ...
Loading ...
alarm can be deactivated with a short press and release of ,by
turning the ignition to RUN, or by allowing the alarm to time out after 3
minutes.
Note: The panic alarm will only operate when the ignition is in the 1
(LOCK) position.
Memory seat feature (if equipped)
The Integrated Keyhead Transmitter allows you to recall the memory
seat/mirror feature.
Press
to automatically move the seat/mirror to the desired memory
position. Note: The seat will not travel to its final position if the key is
not in the ignition and the easy entry feature is enabled.
Activating the memory feature
To activate this feature:
1. Position the seat and mirrors to the desired positions.
2. Press the SET control on the
driver’s door panel.
3. Within 5 seconds, press the 1 or 2
control on the driver’s door panel to
associate with the Driver 1 or Driver
2 position.
4. Press the set button again.
5. Within 5 seconds, press a button
on the associated Integrated
Keyhead Transmitter.
6. Within 5 seconds, press the 1 or 2 control on the driver’s door panel to
associate with the Driver 1 or Driver 2 position.
Deactivating the memory feature
To deactivate this feature:
1. Press the SET control on the driver’s door panel.
2. Within five seconds, press any control on the Integrated Keyhead
Transmitter which you would like to deactivate and then press the SET
control on the driver’s door panel again.
3. Repeat this procedure for another Integrated Keyhead Transmitter if
desired.
2007 MKX (mkx)
Owners Guide (post-2002-fmt)
USA (fus)
Locks and Security
119
Loading ...
Loading ...
Loading ...