Loading ...
Loading ...
Loading ...
Before using for the first time
26
Setting the rinse aid dosage
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from 0
to 6ml.
3ml is the factory default setting.
The rinse aid dosage can turn out to be
higher than the set value due to the
automatic adjustment of the pro-
gramme.
If spots appear on crockery and glass-
ware:
- Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
- Decrease the rinse aid dosage.
Switch the dishwasher off with the
button, if it is switched on.
Press theStart button in and, whilst
holding it in, switch the dishwasher
on using the button.
Keep theStart button pressed in for
at least 4seconds until the Start in-
dicator light comes on.
If this does not happen, start the pro-
cedure from the beginning again.
Press the programme selection
button 3 times.
The left indicator light will flash rapidly 3
times at intervals.
The dosage set will appear in the time
display after .
will start flashing in the time display.
Setting3 is set.
Use the Startbutton to select the re-
quired setting.
The dosage amount increases each
time you press the button. When the
highest value is reached, the setting
starts again from the beginning.
The setting is now saved.
Switch the dishwasher off with the
button.
Loading ...
Loading ...
Loading ...