Loading ...
Loading ...
Loading ...
16
*The maximum additional water used for any combination of options is 4.8 gal. (18.2 L).
**There is no intention, either directly or indirectly, that all cycles on a NSF/ANSI 184 certified dishwasher meet the NSF/ANSI 184
performance standard for soil removal and for sanitization efficacy.
Dishwasher Control Section
Options
Can be selected
with
What it does
Added time
to cycle
Added
Water
*
Gallons
(Liters)
High Temp
Raises main wash temperature to improve cleaning
for loads containing tough, baked-on food.
SmartWash
®
Pots & Pans
Normal Wash
Raises the main wash
temperature to 135°F
(57°C).
0:05 to 0:13
0 - 3.9
(0 - 14.6)
Sani Rinse
Sanitizes dishes and glassware in accordance with
NSF International NSF/ANSI Standard 184 for
Residential Dishwashers. Certified residential
dishwashers are not intended for licensed food
establishments. Only sanitizing cycles have been
designed to meet the requirements of the NSF/
ANSI 184 performance standard for soil removal
and for sanitization efficacy. **
The Sani Rinse indicator indicates at the end of
the cycle whether the Sani Rinse option was
successfully completed. If the indicator does not
activate, it is probably due to the cycle
being interrupted.
SmartWash
®
Pots & Pans
Normal Wash
Sani Rinse raises the main
wash temperature to 135°F
(57°C) and the final rinse
temperature to 156°F
(69°C).
0:05 to 1:01
0 - 3.9
(0 - 14.6)
Heated Dry
Turns the heat element on after the wash portion of
the cycle is over. Use rinse aid with or without the
Heated Dry option for best drying results. Plastic
items are less likely to deform when loaded in the
top dish rack.
Available with
any cycle
except
Quick Rinse
Turns the heat element on at
the end of the wash portion
of the cycle.
0:08 to 0:43
0
H
E
H
E
Delay Hours (on some models)
Use this option to run your dishwasher during off-peak hours. Local utility providers recommend using energy during off-peak hours
when possible. Delay displays how many hours Before the cycle will begin.
To delay the start
1. Select a wash cycle and options.
2. Press the Delay button. Each time you press the Delay button it will display the next available delay time.
3. Press START/RESUME to begin the delay countdown.
NOTE: Anytime the door is opened (such as, to add a dish), the Start/Resume button must be pressed again to resume the delay
countdown.
Control Lock Option
Use the Control Lock option to avoid unintended use of the dishwasher between cycles. When the Lock indicator is lit, all buttons
are disabled. The dishwasher door can still be opened or closed while the controls are locked.
To turn on the Lock
Press and hold SANI RINSE for 3 seconds. The Lock indicator will light up. If you press any pad while your dishwasher is locked, the
light flashes 3 times.
NOTE: The dishwasher cannot start if the control is locked.
To turn off the Lock
Press and hold SANI RINSE for 3 seconds. The light turns off.
Loading ...
Loading ...
Loading ...