Loading ...
Loading ...
Loading ...
- 7 -
7. Always replace the HEPA bag after sweeping up large quantities
of fine material such as fine sand, cement, flour, etc.
*** Atrix Part # for a 5 pack of replacement HEPA filter bags: AHLR-2***
Cleaning the motor filter
1. The motor filter can be found in the HEPA bag compartment.
It protects the motor from dust and should be cleaned
at least twice a year, when it is dirty, or if suction force is reduced.
2. Pull the filter holder up out of the vacuum cleaner.
3. Rinse the filter in warm water, and allow it to dry completely.
4. Return the filter to the holder, and replace the filter holder in
the vacuum cleaner.
IMPORTANT! Never use the vacuum cleaner without a motor
filter.
Transport and Storage
1. You can lift and carry the vacuum cleaner using the carrying handle. Never pull or lift the vacuum cleaner
by the cord.
2. Before putting the vacuum away, turn vacuum off, unplug, and press the cord rewind button until the cord
is fully rewound.
Cleaning
Unplug Vacuum.
Clean the vacuum cleaner by wiping it with a damp cloth.
You must never use any form of strong solvent or abrasive cleaning agent.
Environmental tips
Once any electronic product is no longer functional, it should be disposed of in such a way as to cause
minimum environmental impact, in accordance with the regulations of your local authority. In most cases you
can take such products to your local recycling station.
Motor
Filter
Loading ...