Loading ...
Loading ...
Loading ...
13 INSTALLATION
Removing/Assembling the
Freezer Drawer Handle
Removing the Handle
1
Loosen the set screws located on the
lower side of the handle with a
3/32
in.
(2.5mm)
Allen wrench and remove the handle.
2
Loosen the mounting fasteners that
connect to the
freezer drawer
and handle
using a
(6.35 mm)
1
/
4
in.
Allen wrench,
and remove
the mounting
fasteners.
Assembling the Handle
1
Assemble the mounting fasteners at
both ends of the handle using a
1
/
4
in. Allen
(6.35 mm)
wrench.
2
handle
footprints over
the mounting
fasteners and
tightening the
set screws
with a 3/32 in.
(2.5 mm)
Allen wrench.
Removing/Assembling the
Doors and Drawers
When it is necessary to move the refrigerator
through a narrow opening, removing the doors
is the recommended procedure.
WARNING
When assembling or disassembling the
handle:
y
Grasp the handle tightly to avoid drop-
ping it.
y
Do not swing the handle into nearby
people or animals.
y
Make sure that the bracket hole of the
bolt of the door. Assemble the set
y
Make sure that there is not a gap
between the door and handle after
assembling the handle.
WARNING
y
If your entrance door is too narrow
for the refrigerator to pass through,
remove the refrigerator doors and move
the refrigerator side ways through the
doorway.
y
Use two or more people to remove and
install the refrigerator doors. Failure to
do so can result in back or other injury.
y
Disconnect the electrical supply to the
refrigerator before installation. Failure
to do so could result in serious injury or
death.
y
Do not put hands, feet or other objects
into the air vents or bottom of the
refrigerator. You may be injured or
receive an electrical shock.
y
Be careful when handling the hinge and
stopper. You may be injured.
y
Remove food and bins before detaching
the doors and drawers.
ENGLISH
Loading ...
Loading ...
Loading ...