Loading ...
Loading ...
Loading ...
PROGRAMMABLE SERVICE INTERVAL
When the number of logged engine operation hours reaches a programmed
service interval, the Wrench icon will appear and flash for 5 seconds each time
the engine is started. This feature provides a convenient reminder to perform
routine maintenance on your vehicle.
NOTICE
The service interval is pre-programmed to 50 engine hours at the factory.
To customize the service interval, do the following:
1. From the Service Interval screen, press the Mode Button until remaining
service hours display.
2. PRESS and HOLD the Mode Button.
3. When service hours flash, press and RELEASE the Mode Button to set
hours to desired setting. PRESS and HOLD the Mode Button to save the
new service hour interval.
4. To disable the service interval feature, toggle through the hours setting until
OFF appears. PRESS and HOLD the Mode Button to save setting.
DIAGNOSTIC DISPLAY MODE
The EFI diagnostic display mode is for informational purposes only. Your
POLARIS dealer or other qualified technician can provide all major repairs.
The diagnostic mode is accessible only when the check engine warning
indicator is activated after the key is turned on. Leave key ON to view the active
code (failure code).
Diagnostic mode becomes inaccessible once the warning has been resolved
and key is turned OFF. This allows the determination of persistent as well as
intermittent faults.
Inactive codes are stored in the history of the unit.
ENGINE ERROR CODES
The error code screen displays only if the CHECK ENGINE indicator lamp has
been activated.
IMPORTANT
Error codes are not stored in the system’s computer. When the key is turned
OFF, the code and message will be lost. If the fault reoccurs, the error will
display again after restarting the engine.
45
FEATURES AND CONTROLS
Loading ...
Loading ...
Loading ...