Loading ...
Loading ...
Loading ...
4
AUTO SHUT-OFF
• If the iron is motionless, it will switch off after about 30 seconds with the soleplate down, or
about 8 minutes if it’s upright.
• The temperature light will flash yellow, and keep flashing till you move the iron.
• To switch on again, lift it up, tilt it forward, then sit it upright to return to operating
temperature.
• The temperature light will flash the colour appropriate to the current setting till it reaches
operating temperature
PREPARATION
1. Check for textile care symbols (i j k l).
2. Iron fabrics needing low temperatures j first, then those that need medium
temperatures k, and finish with those needing high temperatures l.
TEMPERATURE SETTING GUIDE
Label marking Dot setting
j cool – nylon, acrylics, polyester
•
k warm – wool, polyester mixtures
••
l hot – cotton, linen
•••
Max – denim Max
i do not iron
-
If the instructions on the fabric label differ from this guide, follow the instructions on the label.
FILLING
You may use the iron with tap-water, but if you live in a hard water area, you should use distilled
water (not chemically descaled or softened water).
If you buy distilled water, check that it’s marketed as suitable for use in irons.
1. Unplug the iron.
2. Open the water inlet cover.
3. Hold the iron with the soleplate down.
4. Pour slowly, to let the air in the reservoir escape, otherwise you’ll cause an air lock and the
water will overflow.
5. Don’t fill past max, or water will escape in use.
6. Wipe up any spillage.
SWITCH ON
1. Sit the iron on its heel.
2. Put the plug into the power socket (switch the socket on, if it’s switchable). The iron will
beep and the light in the handle will come on yellow, to show it’s in standby mode.
3. Press and release the temperature button to select the temperature you want.
Loading ...
Loading ...
Loading ...