Loading ...
Loading ...
Loading ...
GB
11
Wash cycles and options
Wash options
- If the selected option is not compatible with the
programmed wash cycle, the indicator light will flash and
the option will not be activated.
- If the selected option is not compatible with another
option which has been selected previously, the indicator
light corresponding to the first option selected will flash and
only the second option will be activated; the indicator light
corresponding to the enabled option will remain lit.
Selecting this option enables you to suitably adjust drum
rotation, temperature and water to a reduced load of lightly
soiled cotton and synthetic fabrics (refer to the
“Table of
wash cycles”
). “ ” enables you to wash in less time
thereby saving water and electricity. We suggest using a
liquid detergent suitably measured out to the load quantity.
Intensive Wash
Because a greater quantity of water is used in the initial
phase of the cycle, and because of the increased cycle
duration, this function offers a high-performance wash.
Table of wash cycles
Easy iron
By selecting this function, the wash and spin cycles will be
modified in order to reduce the formation of creases. At
the end of the cycle the Washer-dryer will perform slow ro-
tations of the drum; the indicator lights for the EASY IRON
and START/PAUSE options will flash (the first one green,
the second orange). To end the cycle, press the START/
PAUSE button or the EASY IRON button.
For the 6 wash cycle, the machine will end the cycle while
the laundry is soaking and the EASY IRON and START/
PAUSE indicator lights will flash. To drain the water so that
the laundry may be removed, press the START/PAUSE
button or the EASY IRON button.
Note: If you also want to run the drying cycle, this option is
enabled only if combined with level “A1” (Iron dry).
Delay Timer
To set a delayed start for the selected cycle, press the
corresponding button repeatedly until the required delay
period has been reached. When this option is enabled, the
corresponding indicator light will remain lit. To remove the
delayed start setting, press the button until the text “OFF”
appears on the display.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as
water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
For all Test Institutes:
1) Test wash cycle in compliance with regulation EN 50229: set wash cycle 1 with a temperature of 60°C.
2) Long wash cycle for cottons: set wash cycle 1 with a temperature of 40°C.
3) Short wash cycle for cottons: set wash cycle 3 with a temperature of 40°C.
Wash cycles
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Drying
Detergents
Max.
load
(kg)
Cycle
duration
Wash
Fabric
softener
Daily
1
White Cotton: extremely soiled whites. 90° 1200
7
1
White Cotton (1): heavily soiled whites and resistant colours. 60° 1200
7
1
White Cotton (2): lightly soiled whites and delicate colours. 40° 1200
7
2
Cotton: heavily soiled whites and resistant colours. 60° 1200
7
3
Coloured Cotton (3): lightly soiled whites and delicate colours. 40° 1200
7
4
Synthetics: heavily soiled resistant colours. 50° 1000
4,5
Special
5
Wool: for wool, cashmere, etc. 40° 800 -
2
6
Silk/Curtains: for garments in silk and viscose, lingerie. 30° 0 -
1
7
Jeans
40° 800
4
Sport
8
Sport Intensive
30° 600 -
4
9
Sport Light
30° 600 -
4
10
Special Shoes
30° 600 -
Max. 2
pairs
Dry
11
Cotton
- -
- - 5
12
Synthetics
- -
- - 4
13
Express Wash&Dry
30° 1200
0,5
Partial wash cycles
Rinse - 1200
-
7
Spin - 1200
- - 7
Drain - 0 - - - 7
The duration of the wash cycles can be checked on the display.
Loading ...
Loading ...
Loading ...