Loading ...
Loading ...
Loading ...
HEADLIGHT HOUSING REPLACEMENT
1. Remove the four (4) headlight pod screws.
2. Pull the pod cover forward.
3. Unplug the headlamp from the wiring harness.
4. Use a small screwdriver to remove the o-rings from the headlight mounting
tabs.
5. Pull the headlight housing up from the bracket for removal.
6. Reverse the steps to install the new housing and reassemble the pod.
LOWER HEADLAMP REPLACEMENT
1. Turn the back of the headlight harness counter-clockwise and pull the
harness assembly away from the headlight assembly.
2. Remove the headlamp and install the new headlamp.
3. Reinstall the harness assembly into the headlight assembly.
NOTE
Take care to avoid touching the glass on the new headlight bulb. Fingerprints
on the glass may result in premature failure.
4. Turn the headlight harness clockwise to secure the headlamp.
TAILLIGHTS/BRAKE LIGHTS REPLACEMENT
Procedure to replace taillights:
TO REPLACE LEFT TAILLIGHT:
1. Remove the harness connector from the back of the light assembly.
2. Remove the 3 fasteners securing the light assembly and remove the light
assembly.
3. Install the new light assembly and tighten the 3 fasteners to secure the light
assembly.
4. Reinstall the harness connector. Test the light for proper operation
TO REPLACE RIGHT TAILLIGHT:
1. Remove the heat shield covering the light assembly.
2. Remove the harness connector from the back of the light assembly.
106
MAINTENANCE
Loading ...
Loading ...
Loading ...